SELLEYS LIQUID NAILS 75GM-106711

1. Ensure surfaces are free from oil, grease and dust. Wipe off any pooled water from wet timber.

2.Cut cartridge tip, fit nozzle and cut to desired opening (5mm) then insert into caulking gun.

3.Apply bead using caulking gun, along length of joist, stud or batten. On broad flat surfaces apply beads every 40cm.

4.Position pieces and press firmly together. Fix with sufficient nails, screws or clamping to hold load and achieve contact over total bond area. Repositionable for up to 20 minutes after fitting.

5.Allow adhesive to set (minimum 24 hours**) before removing any temporary fasteners or clamping. Use with mechanical fasteners in high stress applications.