SELLEYS GROUT STAIN WHITENER 280G SL-GS-WHITENER

1. Clean tiled area and grout thoroughly. Ensure that the area is dry. Wearing gloves, apron and old clothing is recommended.

2. Press foam applicator firmly against grout and apply even pressure to the tube while moving applicator along grout lines.

3. Allow to dry for at least 30 minutes, then check if sufficiently dry by wiping over with a damp cloth. If product is not dry, allow a longer drying time (no more than 2 hours).

4. When dry, remove excess with a lint free damp cloth or sponge, wiping diagonally across the grout line.

5. Reapply where too little product was applied or too much was wiped off.

6. After use, rinse sponge tilting downwards under tap. Blot dry and replace lid firmly until next use.

7. Allow at least 5 hours before treated area is exposed to water.

Limitations:

Do not use on unglazed or porous tiles and stone.

Not recommended for tiles with intricate patterns or grooves from which the product may be difficult to remove.